A Detailed Overview of Assessment Validation and Validating Assessments
A Detailed Overview of Assessment Validation and Validating Assessments
Blog Article
RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
A Look at the Two Types of Assessment Validation
The Basics of Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
Here, we will concentrate on assessment tool validation.
Steps for Conducting Assessment Tool Validation
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
Optimal Timing for Assessment Tool Validation
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
There's no necessity to wait for the next 5-year cycle validation schedule. Validate new resources immediately to ensure they are appropriate for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- you update your resources
- new training products get added on scope
- course gets reviewed against training product updates
- learning resources are identified as a risk during your risk assessment
ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.
What Training Products Should Be Validated?
Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.
What You Need for Assessment Tool Validation
Teaching Materials
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Validation Group
Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.
Overall, your validation panel should have:
Current vocational competencies and relevant industry skills for the unit being validated
Recent expertise and skills in vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
We recommend a more detailed template to inspect each unit requirement and the assessment items that correspond to them. Here is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do here you Need to Check?
What to Check?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Assessment Principles
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment assessing what it is supposed to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Evidence Rules
Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Are the assessment tools updated to reflect current units of competency and industry practices?
Despite these being frequently addressed in VET professional development and nationally recognised training, heaps of tools still have problems with these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Lead by Example
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
diaper changing
prepare bottles, feed babies from bottles, and clean equipment
prepare solid foods and feed babies
appropriately respond to baby signs and cues
prepare and settle babies for rest
monitor and foster physical exploration and gross motor skills appropriate for the age
Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
All or No Competence
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
Answers can include:
Obligatory resources
Pertinent costs
Duration of activities
Assigned roles and responsibilities
If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.
This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Answers may include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – elimination, isolation, engineering controls
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolating, use of engineering controls, administrative controls
Equipment or machinery – isolating, engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.